Multi Cartridge Filter Housing - 5 & 6 Cartridges

NEED HELP?
Click image to enlarge
Rugged, low-cost cartridge design for flow rates to 100 gpm*

These cartridge-filter housings are rugged and low in cost. They hold five or six cartridges, in either 10-inch, 20-inch, 30-inch, or 40-inch lengths, using industry standard designs (222, SOE, or DOE). Choose from either the eye nut style cover or the “quick-opening” clamp design uses a standard O-ring.

Standard Features of Multi Cartridge Filter Housings

  • Low pressure drop
  • Permanently piped housings are opened without disturbing the piping or requiring tools
  • Quick-opening
  • Carbon or stainless steel housings
  • Adjustable-height tripod legs
  • Holds 5 or 6 cartridge elements
  • Cartridge options in four lengths: 10”, 20”, 30”, 40”
  • 125-psi and 150-psi rated housings
  • 3/4-inch clean-dirty/gage ports
  • 2-inch female NPT ports
  • V posts or threaded-center posts for cartridge restraint
  • Standard hardware V-post and spring seals are 316 stainless steel.
  • O-ring seals: Buna N, EPR, Fluoroelastomer

*Based on housing only. Fluid viscosity, filter cartridge used, and expected dirt loading should be considered when sizing a filter.
 
Rugged, low-cost cartridge design for flow rates to 100 gpm*

These cartridge-filter housings are rugged and low in cost. They hold five or six cartridges, in either 10-inch, 20-inch, 30-inch, or 40-inch lengths, using industry standard designs (222, SOE, or DOE). Choose from either the eye nut style cover or the “quick-opening” clamp design uses a standard O-ring.

Standard Features of Multi Cartridge Filter Housings

  • Low pressure drop
  • Permanently piped housings are opened without disturbing the piping or requiring tools
  • Quick-opening
  • Carbon or stainless steel housings
  • Adjustable-height tripod legs
  • Holds 5 or 6 cartridge elements
  • Cartridge options in four lengths: 10”, 20”, 30”, 40”
  • 125-psi and 150-psi rated housings
  • 3/4-inch clean-dirty/gage ports
  • 2-inch female NPT ports
  • V posts or threaded-center posts for cartridge restraint
  • Standard hardware V-post and spring seals are 316 stainless steel.
  • O-ring seals: Buna N, EPR, Fluoroelastomer

*Based on housing only. Fluid viscosity, filter cartridge used, and expected dirt loading should be considered when sizing a filter.