|
These new cartridge housings are designed to end the high cost of cartridge change-out. They are offered in three Model 8 styles (LCO, Polypropylene, and Standard Model 8) and Multi-cartridge housings.
- Housings available in carbon steel, 304 or 316 stainless steel and polypropylene
- Pressure ratings in 100, 125, and 150 psi
- Clean and dirty/gage port connections
- O-ring seals: Buna, Ethylene Propylene, Viton®, and Teflon® Encapsulated Viton®
- ASME code stamp available on selected models
- Flanged or threaded connection sizes from 2-inch through 10-inch
- Covers are o-ring sealed and easy to remove
- Leg assembly (excludes CR8)
- Multi-cartridge units are offered in the low profile design, for quick and easy cartridge removal
A single 700 Series cartridge unit will out perform 40 standard wound or 10 pleated cartridges, reducing maintenance. A decrease in cartridge use, reduces labor, inventory, worker exposure and disposal costs. Flow rates and contaminant holding capacities vary depending on micron size. A single cartridge element holds as much as 20 pounds of contaminant and flows to 100 gallons per minute. The labor-intensive v-posts and spring seals are eliminated and cartridges are easily removed, requiring no special tools. Elements are approximately 6.25-inch diameter and 35-inch length. The 700 series filter housings contain one, four, seven, or eighteen cartridges, with a 226-end cap design.
For more information about the 700 Series cartridge element, click here.
|
 |
 |
 |
|
End the high cost of element change-out with the Platinum 900-cartridge filter system. Imagine changing a filter element only once or twice a year, instead of changing several cartridges on a weekly or daily basis!
- Housings available in carbon steel, 304 or 316 stainless steel.
- Pressure rating 150 psi
- Clean and dirty/gauge port connections
- O-ring seals: Buna, Ethylene Propylene and Viton®
- Covers are o-ring sealed and easy to remove
- ASME code stamp (optional)
- Flange connection sizes from 3-inch through 10-inch
- Cable-hoist assembly for quick and easy removal of element is standard on Model 18 (optional on other models)
A single cartridge system has the life of 200 standard wound or 50 pleated cartridges, reducing maintenance. A decrease in cartridge use, reduces labor, inventory, worker exposure, and disposal costs. Flow rates and contaminant holding capacities vary depending on micron size. A single cartridge element can hold up to 100 pounds of contaminant and flows to 400 gallons per minute. Elements are 13-inch diameter and 40-inch length.
The 900 filter housings contain one, three, four, seven, or eight cartridges.
By using the cable-hoist assembly change-out is completed in minutes. The element shipping container allows for easy handling and disposal.
For more information on the 900 Series cartridge element, click here.
|
 |
|
|
